Strait-Line 6041101CD LL120 3/16-Inch at 20-Feet Manual Level Interior Line Laser

Strait-Line 6041101CD LL120 3/16-Inch at 20-Feet Manual Level Interior Line Laser Reviews

Other Picture

Strait-Line 6041101CD LL120 3/16-Inch at 20-Feet Manual Level Interior Line Laser Feature

• Manual laser level; accurate to 3/16-inch at 20-feet; mounts with no damage with 3M Command Strips
• Rotates 360-degrees; 120-foot combined range; dual bubbles vials for horizontal, vertical layout
• Durable plastic housing
• Includes laser level and 4 adhesive strips; 2 AA batteries not included
• 3-5/8-inches diameter on base; 3-1/4-inches high; 5-year warranty

Here's a laser level perfect for the homeowner or contractor who's hanging cabinets or shelving, installing suspended ceiling or flooring or just hanging artwork. It's compact, inexpensive and reliable. Strait-Line's 60-foot laser line can mark a 120-foot work area by swiveling the laser, and it's accurate to +/- 3/16" at 20 feet. Best of all, it leaves not a mark on your surface, unlike other laser levels we've seen that have pins on the back. Instead, just peel the strip of 3M Command Adhesive (be sure to affix the correct side to each surface) and place the level. For a horizontal line, just turn the unit until the bubble in the horizontal level is between the two lines. For a vertical line, keep your eye on the vertical level's bubble. Lengthening the line is a snap, accomplished just by changing the tilt angle on the mounting base up to 4 degrees. At its full length, the line isn't as bright as when it's projecting just a few feet, but even so, it's bright enough to work from. Hanging a wall border around a corner? No problem: The laser will round the bend for you. It's slick, fast, easy and fun. Our only complaints: It only comes with four Command Adhesive strips (so stock up) and the two AA batteries are not included. Other than that, it's a great little tool.--Kris Jensen-Van Heste Strait-Line Laser Level, 120 Is A High Power Surface Mount Laser Square That Works In Brightly Lit Workplaces, Features 2 Axis Adjustment, A 360 Degree Rotation and Aim, That Provides Optimal Line Control Over 120' Workspace, Laser Line 120 Includes An Angle Indexing Ring That Provides Accuracy In Results, A 635 NM Laser Diode For Superior Line Visibility In Brightly Lit Conditions and A Rubberized Case For Durability.

Visit Store Now !!

Detail Products

• CH Hanson 03040 Magnetic Stud Finder
• STRAIT-LINE 6041400CD Rolling Tape 300
• Strait-Line 6041103 X3 1/4-Inch at 20-feet Manual Level 2 Line Laser
• Strait-Line 6045707 Laser Leveler and Sonic Laser Measuring Tape Combo Pack
• Stanley 77-188 S2 Laser Level Square

Detail Reviews

Apr 30, 2011 08:16:04

GSI Handheld Professional Non-Contact High-Temperature IR Infrared Thermometer Gun With Laser Targeting - Instant Accurate °C Or °F Measurements From Distance - LCD Display And Alarm - For Electrical, HVAC, Automotive Diagnostics, Or Cooking Etc.

GSI Handheld Professional Non-Contact High-Temperature IR Infrared Thermometer Gun With Laser Targeting - Instant Accurate °C Or °F Measurements From Distance - LCD Display And Alarm - For Electrical, HVAC, Automotive Diagnostics, Or Cooking Etc. Reviews

Other Picture

GSI Handheld Professional Non-Contact High-Temperature IR Infrared Thermometer Gun With Laser Targeting - Instant Accurate °C Or °F Measurements From Distance - LCD Display And Alarm - For Electrical, HVAC, Automotive Diagnostics, Or Cooking Etc. Feature

• Multi Functional IR Pro Thermometer- Instant, Accurate Readings - Auto Shut Off - High-Low Alarm Set
• Simply Point And Press- LCD Will Display Temperature - Max, Min, Average And Differential Readings
• Measurement Range: -50 to 2912 °F (-45 to 1600 °C); Distance To Spot Ratio - 50:1; Response Time- 1s
• Measure Hard To Reach Hazardous Objects- High Temperatures Or Moving Objects - Over Range Indication
• In Box: IR Thermometer, Deluxe Carrying Case - Please Read Instructions Before Use

The GSI Non-Contact Infrared Thermometer with Laser is designed to measure temperatures accurately from a distance. Sturdy, Safe and easy to use, It can safely measure hot, hazardous, or hard-to-reach surfaces without damaging them. Perfect For The Professional Or Private User - Friendly And Affordable

Visit Store Now !!

Detail Products

Detail Reviews

Apr 29, 2011 11:56:04

Zircon MultiScanner i520 Center-Finding Stud Finder with Metal and AC Electrical Scanning

Zircon MultiScanner i520 Center-Finding Stud Finder with Metal and AC Electrical Scanning Reviews

Other Picture

Zircon MultiScanner i520 Center-Finding Stud Finder with Metal and AC Electrical Scanning Feature

• Locates the edges and center of wood or metal studs up to 1 1/2-Inches (38 mm) deep
• Scans for metal and live AC wires
• Easy-to-read LCD display, audio tone, and the patented SpotLite Pointing System indicate stud center
• WireWarning detection indicates the presence of live, unshielded electrical wiring up to 2-Inches (51 mm) deep
• Have questions? Need more information? Call the Zircon Customer Service department at 1-800-245-9265, Monday-Friday 9am - 5pm PST. We'll be happy to help!

i520 Scanning Modes Stud Scan mode for finding studs in drywall. DeepScan mode for finding studs and joists in thicker walls, floors, and ceilings. Metal Scan mode for finding pipes or other metal. Metal Scan mode can also help find studs in lath and plaster walls. Electrical Scan mode for locating live, unshielded AC wires.

Watch the i520 in action. See how all the features of an i520 are used.

Zircon's Top-of-the-Line Multifunction Scanner for Finding Studs, Metal, and Electrical

Our Best Scanner
The MultiScanner i520 is the most advanced wall scanner that Zircon makes. It has 4 scanning modes:

• STUD SCAN mode locates the edges and center of wood or metal studs in normal walls up to 3/4 inch (19 mm) deep
• DEEPSCAN mode doubles the scanning depth for walls up to 1 1/2 inches (38 mm) deep, and enables scanning for joists in some ceilings and floors
• METAL SCAN mode detects non-ferrous metal, such as copper pipes, up to 1 1/2 inches (38 mm) deep, and ferrous metal, such as rebar, up to 3 inches (76 mm) deep
• AC SCAN mode finds and traces live, unshielded electrical wiring up to two inches deep

In addition to the scanning modes, the i520 is packed with other original and patented features:

• WireWarning detection indicates the presence of live, unshielded electrical wire up to 2 inches (51 mm) deep in stud and metal scanning modes. Most wires in homes are run along wall studs, causing potential safety hazards.
• ACT (Auto Correcting Technology) automatically corrects common user errors, such as when scanning begins over a stud. The tool constantly scans its surroundings and recalibrates itself if necessary.
• An ultra-bright LCD screen indicates direction, edges and center of studs. Makes the screen easier to see in low-light situations.
• The display screen, SpotLite Pointing System, and audio tone all indicate the location of the target.
• A signal strength indicator lets you distinguish between shallow and deep targets. Weak signal strength can also imply other non-stud objects, like wires and pipes.

The i520 is a perfect choice for serious users, such as home improvement hobbyists and professional contractors. Not sure if the i520 is what you need? See the grid below to decide which center-finding tool is right for you.

Which Center-Finding Stud Sensor is Right for You?
	StudSensor i65 OneStep	MultiScanner i320 OneStep	MultiScanner i520 OneStep

Why Zircon?

Zircon introduced the first stud finders over 25 years ago. We're a smaller, more focused company than our competitors, but thanks to our reputation for engineering and customer service, our brand dominates the stud finder market domestically and abroad. The Handyman Club of America, and their official publication, Handy Magazine, have awarded Zircon's MultiScanner i520 their seal of approval after a round of extensive member testing. The i520 earned a 9.0 (out of 10) overall rating and a whopping 99% approval rating from Handyman Club Members.

Patent pending CenterVision technology finds the stud center in 1 step. Finds the center and edges of studs and joists, finds copper pipes (and other nonferrous metal) up to 1 1 2" (38mm) deep, finds rebar (ferrous metal) in concrete up to 3" (76mm) deep,

Visit Store Now !!

Detail Products

• Stanley 20-556 6-Inch FatMax Jab Saw
• CH Hanson 03040 Magnetic Stud Finder
• Stanley 77-188 S2 Laser Level Square
• OOK 50918 34 Piece Professional Picture Hanging Value Pieces Kit
• Black & Decker BDSL10 36-Inch Gecko Grip Level with Accu Mark

Detail Reviews

Apr 28, 2011 11:10:11